Instruction Manual How to Use Power Bank DVR Spy Camera 720P

Just purchase power bank spycam from ebay and dont know hot to use it? please follow this instruction manual in this blog.

At glance ..

• The following pictures are provided for illustration only;
• This guide briefly describes the functions of the DVR. For details about how to set the software management, see Recording time setting;
• Place and operate the DVR in a ventilated area if the DVR is having prolonged use;
• Please read carefully before operation, to ensure you have understood its operation.

 Before You Start To  Operate Power Bank Spycam

• This powerbank spycam use external micro SD or TF Card to store the video file;
• You need to install micro SD into  slot inside the power bank, see the picture below for your reference;
  

 

 

 

 

 

Slot  Power Bank Spycam 720P

Make sure DVR works well after you installed the memory card, and then stick the back mirror plate back.

Close back cover if you had installed micro SD

 How to Charge power bank spycam 720p

• Use the USB cable to connect DVR to PC to charge (approx takes 4~6hours for full charge) or use AC adapter to charge.

• When charging, the red and blue light will continue flash, if the battery was full,the red light will go off and blue light on. (100% indicator).
• There are two metods of charging, you can charge using wall usb charger or using Personal Computer;
  
• If You use wall charger, The charger must be 5V,500mA or 1000mA.vIf you use any other charger incompatible with the DVR, maybe will cause damage to DVR ;
• The charger is an optional accessory. If the charger is not provided in the package, you can contact your local dealer to buy one yourself

• For charging with PC, Please use the USB cable to connect your DVR to a PC;
• Connect to PC for about 6 hours to get full charged;

 How To Record Video using Power Bank SpyCam 720P

• Press and Hold the power button approx 3sec till red light is ON (stanby mode);
• From standby mode then continue shortly press the power button  the red light flashes twice and goes off;
• Light goes off mean DVR starts to record video;
• Shortly press the power button one time while recording, the red light will be on again, it becomes standby mode and video was saved to micro SD;